構造体定義書 VC2010

arbelprm_query_fw_st

構文構文

Little Endian

struct arbelprm_query_fw_st

ファイル名ファイル名

MT25218_PRM.h

構造体情報構造体情報

No. 名称 属性説明
1
arbelprm_query_fw_st  Little Endian
  fw_rev_major[0x00010] pseudo_bit_t Firmware Revision - Major
  fw_pages[0x00010] pseudo_bit_t Amount of physical memory to be allocated for FW usage is in 4KByte pages.
  fw_rev_minor[0x00010] pseudo_bit_t Firmware Revision - Minor
  fw_rev_subminor[0x00010] pseudo_bit_t Firmware Sub-minor version (Patch level).
  cmd_interface_rev[0x00010] pseudo_bit_t Command Interface Interpreter Revision ID
  reserved0[0x0000e] pseudo_bit_t  
  wqe_h_mode[0x00001] pseudo_bit_t Hermon mode. If '1', then WQE and AV format is the advanced format
  zb_wq_cq[0x00001] pseudo_bit_t If '1', then ZB mode of WQ and CQ are enabled (i.e. real Memfree PRM is supported)
  log_max_outstanding_cmd[0x00008] pseudo_bit_t Log2 of the maximum number of commands the HCR can support simultaneously
  reserved1[0x00017] pseudo_bit_t  
  dt[0x00001] pseudo_bit_t Debug Trace Support
  cmd_interface_db[0x00001] pseudo_bit_t Set if the device accepts commands by means of special doorbells
  reserved2[0x0001f] pseudo_bit_t  
  reserved3[0x00060] pseudo_bit_t  
  clr_int_base_addr_h[0x00020] pseudo_bit_t Bits [63:32] of Clear interrupt register physical address.
  clr_int_base_addr_l[0x00020] pseudo_bit_t Bits [31:0] of Clear interrupt register physical address.
  reserved4[0x00040] pseudo_bit_t  
  error_buf_start_h[0x00020] pseudo_bit_t Read Only buffer for catastrophic error reports (physical address)
  error_buf_start_l[0x00020] pseudo_bit_t Read Only buffer for catastrophic error reports (physical address)
  error_buf_size[0x00020] pseudo_bit_t Size in words
  reserved5[0x00020] pseudo_bit_t  
  eq_arm_base_addr_h[0x00020] pseudo_bit_t Bits [63:32] of EQ Arm DBs physical address.
  eq_arm_base_addr_l[0x00020] pseudo_bit_t Bits [31:0] of EQ Arm DBs physical address.
  eq_set_ci_base_addr_h[0x00020] pseudo_bit_t Bits [63:32] of EQ Set CI DBs Table physical address.
  eq_set_ci_base_addr_l[0x00020] pseudo_bit_t Bits [31:0] of EQ Set CI DBs Table physical address.
  cmd_db_dw1[0x00010] pseudo_bit_t offset in bytes from cmd_db_addr_base where DWord 1 of a Command Interface Doorbell should be written. Valid only if CmdInterfa
  cmd_db_dw0[0x00010] pseudo_bit_t offset in bytes from cmd_db_addr_base where DWord 0 of a Command Interface Doorbell should be written. Valid only if CmdInterfa
  cmd_db_dw3[0x00010] pseudo_bit_t offset in bytes from cmd_db_addr_base where DWord 3 of a Command Interface Doorbell should be written. Valid only if CmdInterfa
  cmd_db_dw2[0x00010] pseudo_bit_t offset in bytes from cmd_db_addr_base where DWord 2 of a Command Interface Doorbell should be written. Valid only if CmdInterfa
  cmd_db_dw5[0x00010] pseudo_bit_t offset in bytes from cmd_db_addr_base where DWord 5 of a Command Interface Doorbell should be written. Valid only if CmdInterfa
  cmd_db_dw4[0x00010] pseudo_bit_t offset in bytes from cmd_db_addr_base where DWord 4 of a Command Interface Doorbell should be written. Valid only if CmdInterfa
  cmd_db_dw7[0x00010] pseudo_bit_t offset in bytes from cmd_db_addr_base where DWord 7 of a Command Interface Doorbell should be written. Valid only if CmdInterfa
  cmd_db_dw6[0x00010] pseudo_bit_t offset in bytes from cmd_db_addr_base where DWord 6 of a Command Interface Doorbell should be written. Valid only if CmdInterfa
  cmd_db_addr_base_h[0x00020] pseudo_bit_t High bits of cmd_db_addr_base, which cmd_db_dw offsets refer to. Valid only if CmdInterfaceDb bit is '1'
  cmd_db_addr_base_l[0x00020] pseudo_bit_t Low bits of cmd_db_addr_base, which cmd_db_dw offsets refer to. Valid only if CmdInterfaceDb bit is '1'
  reserved6[0x004c0] pseudo_bit_t  

See Also

目次 | ファイル一覧 | 関数一覧 | ネームスペース一覧 | クラス一覧 | #define一覧 | マクロ一覧 | 外部変数一覧 | 構造体一覧 | 共用体一覧 | 列挙体一覧 | Const一覧 | 索引 | サイドメニュー